search

Dwyer OSW-100 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Dwyer OSW-100. Dwyer OSW-100 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Model OSW-100 Wall Mount Occupancy Sensor
Specifications - Installation and Operating Instructions
Bulletin H-22-OSW
The Model OSW-100 Wall Mount Occupancy Sensor is
an infrared sensor designed to automatically control a
HVAC ventilation system. A unique dual delay processor
eliminates false triggers due to short-term occupancies. The
Model OSW-100 has a wide 110° viewing angle to capture
movement up to 49.2 ft (15 m) away.
INSTALLATION
Do not install where the detector is exposed to direct
sunlight or directly above strong sources of heat.
Do not install in areas that have any obstruction
(plants, large pieces of furniture, curtains, etc.) which
may block the detection.
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000 www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: 219/872-9057 e-mail: info@dwyer-inst.com
SPECIFICATIONS
Infrared Sensor: Dual Element.
Range: 49.2 ft (15 m).
Detectable Speed: 0.33 to 9.8 ft/sec (0.1 to 3.0 m/sec).
Control Output Rating: SPDT, 0.2A @ 30 VDC.
Ambient Operating Temperature: -4 to 140°F (-20 to 60°C).
Power Consumption: Standby: 5 mA, Operating: 18 mA.
Mounting Height: 5.9 to 11.8 ft (1.8 to 3.6 m).
Power Requirements: 22 to 26 VAC/DC.
Weight: 3.2 oz (90.7 g).
Agency Approvals: CE.
2-39/64
[66.28]
1-25/32
[45.24]
4-27/64
[112.32]
H-22-OSW:TEMPLATE 10/9/08 1:02 PM Page 1
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - DWYER INSTRUMENTS, INC

Model OSW-100 Wall Mount Occupancy SensorSpecifications - Installation and Operating InstructionsBulletin H-22-OSWThe Model OSW-100 Wall Mount Occupan

Page 2

MOUNTINGThe OSW-100 is designed to be mounted to a wall orcorner.Step 1: Install Base Unit• Determine the location of the sensor according to the det

Page 3

Step 3: Walk TestBefore beginning test, make certain that the On and Offdelay jumpers (located on the circuit board) are connectedin the “A” positions

Page 4

©Copyright 2008 Dwyer Instruments, Inc. Printed in U.S.A. 9/08 FR# R6-443398-00DWYER INSTRUMENTS, INC. Phone: 219/879-8000 www.dwyer-inst.comP.O. BOX

Commentaires sur ces manuels

Pas de commentaire
  • M-Cab NASA Emtron Daum electronic Ammco
  • Memorex Systèmes de karaoké Promate Banques d'énergie ONKYO Tuner Panasonic Micro-ondes Halfords Nettoyeurs haute pression
  • Samsung DVD-P750 Electrolux eimed60jiw Sony DAV-DZ690M AOpen AP53 Seiko 7T04
  • Samsung SP-P400 Manuel de l'utilisateur Sony ICF-C218 Manuel de l'utilisateur Oster 6230 Manuel de l'utilisateur Mazda MAZDA6 Guide d'installation Bosch MFW1550 Fiche technique